The original Rubber's Finest mouthfeature now only 99,- Euro.
13.12.10
The new movie is now available "OUR LIFE IN EXTREME RUBBER"
"OUR LIFE IN EXTREME RUBBER" shows the fetish life of a real couple, that has made extreme latex masks and heavy rubber equipment an essential part of their lifes. For the first time, the film features in-depth interviews with the protagonists who explain their latex fetishism. The emphasis however, lies on their wild games in latex and extreme masks. German dialogues.
The price is 49,- Euro additional 6,- Euro shipping costs for Europe and 9,- Euro shipping costs for the rest of the world. To order please send an email to sales@rubbers-finest.com.
08.09.2010
The successtory is going on
Additional to our back- and frontsmellbag we now have also a necksmellbag. For all desires now an appropriate smellbag is available. No borders are set to the fantasy. You find further information in our shoparea and a video in our videoarea.
07.09.10
The second movie "Torture in extreme rubber"
Our second movie "Torture in extreme rubber" is now available. The price is 49,- Euro additional 6,- Euro shipping costs for Europe and 9,- Euro shipping costs for the rest of the world. To order please send an email to sales@rubbers-finest.com. Have a look on the trailer in our videoarea.
01.09.2010
Variation of our DF-mask-special
Here a variation of our DF-mask-special. Undermask in black, facepiece in white with black buckles and tinted lenses, mouthfeature in black-white and breathing-part in black.
04.03.2010
Hood for gas mask
Make from your favourite gas mask an individual, high-quality Rubber' s Finest mask, completely according to your desires with the best fit. Send your gas mask to us. We e.g. integrate it in a latexmask 1.5 mm up to 1.8 mm thick . When desired we manufacture your mask also more thickly and in variations in type. The clou are the two steel spiral springs covered with latex, which strengthen the neck conclusion and also the face area. For further information please look into our shop area. Here you see some proposals :
Since today another smellbag is available. The front-smellbag, that can be worn in front and backside. For more informations please have a look in our shop and in our videoarea.
13.11.2009
New mask DF special with integrated collar.
NOW IN OUR SHOP AVAILABLE!!!
You can see our new mask in our videoclip "Covershooting bei Marquis" in our videoarea.
For more information please have a look in our shoparea.
Also in our shop now: HVN special, inflatable with integrated breathing piece!!!
01.09.2009
The renowned
photo artists Calvato
proved once that our BBK with Smellbag is also outdoor suited. In an underground
station people were astonished when the following happened:
Thanks to calvato and his fantastic model.
11.05.2009
Expo
FetishEvolution 2009 Videoclip
This text will be replaced
17.04.2009
Expo
FetishEvolution 2009
Some impressions from our actions on fair Fetishevolution:
Between us: Pupett
Not only Bianca Beauchamps made a little film with our
sarkophag, also other eroticmagazines made films and interviews with us.
Show with Sarkophag and Pupett
Pupett
Doro and Baroness Bijou
Doro and Pupett
Baroness Bijou prepares Pupett and the"Doktor"
for a promotionwalk
Thanks to Baroness
Bjou, Pupett, the"Doktor" and Flo for the pics.
Silicone
oil
For a shiny gloss and for care of Latex we offer Rubber'
s Finest silicone oil . It is very productive. 100 ml
silicone oil (viscosity: 300) for 6,90 € additional shipping (Europe:
3,50 €, rest of the world: 7,- €).
Now
you can get our masks in one of the biggest Fetish- and SM-Store in the
Netherlands:
05.01.2009
The
thickest mask of the world - each is unique
Pure
latex and 20 mm thick. Each mask is unique and can be connected with tubes
with our smellbag or sarkophag.
08.10.2008
Latexmask
CM
Bright
masks – especially for female masklovers – become more and
more trendy. It still remains important that these masks can be combined
very well with the classical latexfetishcolor black. According to this
trend please have a look at our latexmask CM.
Silvermetallic
After
many attempts we succeeded in creating a silvermetallic color tone, which
lets even latex look really metallically. In the past the silvermetallic
color tones, which came on the market, looked a little bit more gray than
metallic. This new silvermetallic color tone is available for all contrast
trims. One of the first latexmask with this new color tone we made for
captured-taboos. They have been so friendly to send us
a picture.
For a customer we made a special
mask. It is a combination between our TV mask and our inflatable HVN mask.
Here are some pics.
12.02.2008 Falsifications
of our masks in ebay
Falsifications
of our masks are offered in ebay world-wide. Beside other masks
especially our Twinset mask is offered as falsification.
We
do not sell masks in ebay. Therefore masks which
are offered as new products are falsifications.
In principle
the falsifications differ from our originals in function, weight,
latexquality and quality of manufacturing.
We documented
the differences between original and falsification in the following
photos.
Original:
2 masks each 5 mm thick with intermediate tube system, chromium-plated
air connecting tubes, latextubes, neck conclusion with latex covered
spiral-springs.
Falsification:
1
mask, approx. 5 mm thick, as air connecting tubes two yellow brass
eyelets and two yellow brass hulls with two plastic tubes .
Here you can
recognize the different surface
quality very well.
Original:
Double mask, undermask with zipper, upper mask with laces, plexiglass
eyes 2 mm thickly, eyelets with fabric and eyelets inside and outside
with galvanized base plates.
Falsification:
One mask, eyes made of folder foil or something like this, eyelets
without fabric and without base plates.
In the following
a detail photo of the eyelets of
the falsifications:
Detail photo
concerning the surface quality
and the manufacturing of the air connecting tubes:
A picture of
the inside
of our original
mask:
A picture from
inside of
the falsification:
We turned the
inside to outside of the falsification,
so you can see the tube system.
Falsification:
Detail picture of the so-called
lenses (made of folder foil or something like
this)
30.05.2008 Latexhood
"Meta"
The new inflatable
mask " Meta" is a 5 mm strong latexhood with
an 0.5 mm strong interior hood. In relation to a normal inflatable hoods
- here it is not so important, if this is a little bit too large - the
hood " Meta" has to fit exactely. The inflatableness
of the hood is in this case an option, in order to achieve a tighter fit
feeling. The applications are manufactured from very strong latex, in
order to prevent an expanding of the hood outward strongly. The pressure
goes here similarly to our other inflatable hoods inside.
Abb: with stenciled
eye holes and nostrils
06.02.2008 Inflatable
Latexsarkophag
Our new inflatable Latexsarkophag is the advancement of the conventional
bodybag. The outer covering is 5 mm thickly and the interior covering
1 mm thickly. Because of the construction this sarkophag is suitable
for persons from 160 to 195 cm length. By the strength of the material
and the applied spiral springs the sarkophag is restrictively, however
also very comfortable, so that it is suitable for long-term stays.
The special feature are the two integrated smellbags, which we equipped
with chromium-plated air supply connecting pieces. With over 20
kg weight is the inflatable latexsarkophag really Heavy Rubber.
Here some pics:
21.01.2008 Mask-combination
"DF"
The new combination mask
"DF", a variant of the system mask, is specially for the
fans of our smellbag combination. The design of the undermask can
be arranged when desired individually. The mouthpiece can be equipped
with anatomical, inflatable and through-breathable and inflatable
gag. The undermask is 1.6 mm thick, has 9 attached buckles, with
lacing or zipper. The up-fastenable breathing mask is 3 mm thick
and can be connected with our smellbag . The delivery contains:
undermask, eyefolder, mouthpiece without gag, up-fastenable breathing
mask.
02.11.2007 The
thickest mask of the world
By
permanante advancement of our dipping technology we succeeded in
making the thickest mask of the world with approx. 2 cm thickness
of pure latex. Each mask is unique. For each mask an individual
dipping form is modelled by hand. With a weight of over 2 kg the
enormous thickness for the wearer becomes clearly noticeable. The
special of our manufacturing process is that the mask has both inside
and outside an absolutely smooth surface. The following pictures
show a design variant, which allows to connect the mask with our
Smellbag or with our Inflatable Heavy Rubber Combination.
Here are some more pics
from our BBK and our Inflatable Heavy Rubber Combination:
From our "BBK with Smellbag" as well as
the inflatable mask "HVN" we developed the ultimative
inflatable Heavy Rubber Combination in connection with an inflatable
straitjacket. This nearly 20 kg heavy combination produces a completely
new Totalenclosure experience. Additional breathing by the Smellbag
gives the ultimative Kick. The outer jacket of the straitjacket
is approx.. 2.5 mm thickly and the interior covering approx.. 1
mm thickly. Due to the special construction the pressure - as with
the HVN - is led direct on the body. The Smellbag is removable,
so that the straitjacket can be carried also alone. This combination
we will present for the first time at the FETISCH
FAIR 26. - 27.05.2007 in BERLIN.
30.10.2006 New product videoclip Now we also have a small videoclip
of our Twinset in the shoparea.
02.10.2006 New product videoclip
Now we also have a small videoclip from the HVN mask in our shoparea.
16.09.2006 Mask BBK and „Smellbag“
The mask BBK and the
"Smellbag" are a combination of the special kind. Here the mask lover
has completely new possibilities to enjoy the smell from pure Latex.
It does not have to be however always Latex, since the "Smellbag" has
a zipper on the inside, by which different things can be put into the
bag. Here no borders are set to the fantasy. The "Smellbag" can be
adapted by the adjustable belt construction individually and ensures
thus an excellent wearing comfort, even over longer time. A sufficient
admission of fresh air is ensured by a perforation in both sides.
For the mask we
developed a completely new breathing mask, it permits to attach 4
tubes, which make most diverse variation options possible to breath
control.According to standard the mask is equipped with clear or dark
glasses. When desired also optical glasses can be attached.
There is a first impression of the combination in a small VIDEOCLIP in
the product description in our shoparea.
23.05.06 The
next generation of blow-up masks
and a corset for men with anatomically
boops
Take
a look at our new blow-up mask, called "HVN", and our
boop-corset for men, which we presented first at the Fetishevolution.
For more information please take a look in our shop area. - Foto
by Robert Chouraqui - www.robertchouraqui.com
05.05.2006 FASHION online
We
have extended our Shop by the range "fashion"
and now our
new products are on-line!
Beyond
that in the next days gradually further new products will follow.
It is always worthwhile to take a look
in the news area, because we will regularly report here about new
product developments. We would be glad about suggestions to and experiences
with our products very much. You can take up connection about the
column "Kontakt" with us.
